MATERIALS.IE
Metals • Plastics • Rubbers • Polymers • Ceramics • Composites
Metals • Plastics • Rubbers • Polymers • Ceramics • Composites
Metals • Plastics • Rubbers • Polymers • Ceramics • Composites • Coatings
Impact Test
Description
The Zwick 5102 Pendulum Impact Tester is designed to perform Izod and Charpy impact bending tests and impact tensile tests on plastics and similar materials.
The machine uses pendulums with energies of 0.5, 1, 2 or 4J.
Absorbed impact energies are output on a digital display.
Zwick 5102 Impact Tester
Specification
| Maximum impact energy | 4J, 2J, 1J, 0.5J |
| Impact Speed | 2.93ms-1 |
| Pendulum Length | 225mm |
| Specimen Span | 40 to 100mm |
Standards
| ASTM E23-018 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
| ASTM D256-10(2018) | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
| ASTM D1822-13 | Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials |
| EN ISO 180:2000 | Plastics - Determination of Izod impact strength |
| EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test |
| EN ISO 179-2:1997 | Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test |
| EN ISO 8256:2004 | Plastics - Determination of tensile-impact strength |
| EN ISO 148-1:2016 (BS EN 10045-1) | Metallic materials. Charpy pendulum impact test. Test method |
| EN ISO 148-2:2016 (BS EN 10045-2) | Metallic materials. Charpy pendulum impact test. Verification of testing machines |
| EN ISO 148-3:2016 | Metallic materials. Charpy pendulum impact test. Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |