MATERIALS.IE
Metals • Plastics • Rubbers • Polymers • Ceramics • Composites
Metals • Plastics • Rubbers • Polymers • Ceramics • Composites
Metals • Plastics • Rubbers • Polymers • Ceramics • Composites • Coatings
METALLOGRAPHIC Preparation
Description
- Workshop
- Bandsaw
- Milling machines
- Lathes
- Metallographic sectioning
- Abrasive cut-off machine
- Low speed diamond saws
- Metallographic mounting
- Hot mounting
- Cold mounting
- Cold vacuum impregnation
- Metallographic polishing
- Silicon carbide pre-grinding
- Diamond polishing
- Electro-polishing
- Metallographic etching
- Chemical etching
- Electro-chemical etching
Buehler Low Speed Diamond Saw
Standards
| ASTM E3-01 | Standard Practice for Preparation of Metallographic Specimens |
| ASTM E340-15 | Standard Test Method for Macroetching Metals and Alloys |
| ASTM E407-07(2015)e1 | Standard Practice for Microetching Metals and Alloys |
| ASTM E1180-08(2014) | Standard Practice for Preparing Sulfur Prints for Macrostructural Examination |
| (ASTM E1182-01) | Standard Test Method for Measurement of Surface Layer Thickness by Radial Sectioning |
| ASTM E1558-09(2014) | Standard Guide for Electrolytic Polishing of Metallographic Specimens |
Struers LaboPress-3 hot mounting press
Struers Discotom 2
